2025 NEW HOLLAND B95D TC For Sale in (2024)

2025 NEW HOLLAND B95D TC For Sale in (1)2025 NEW HOLLAND B95D TC For Sale in (2)

2025 NEW HOLLAND B95D TC For Sale in (3)2025 NEW HOLLAND B95D TC For Sale in (4)

2025 NEW HOLLAND B95D TC For Sale in (5)2025 NEW HOLLAND B95D TC For Sale in (6)

2025 NEW HOLLAND B95D TC For Sale in (7)2025 NEW HOLLAND B95D TC For Sale in (8)

2025 NEW HOLLAND B95D TC For Sale in (9)2025 NEW HOLLAND B95D TC For Sale in (10)

Photos(5)

Loader Backhoes

Call for price

Mason Machinery

Contact:Eric Mason

Phone:(435) 529-7445

Aurora, Utah 84620

(435) 529-7445

General

Description

NEW HOLLAND — B95D TC — LOADER BACKHOE TOOL CARRIERRIGHT FOR YOUR NEEDSD Series loader backhoes represent a huge step forward in operator comfort and productivity while delivering Tier 4 Final emission compliance without compromise. A new cab design features 10% more space and new rear side windows. Experience vastly improved clearance when turning the seat for backhoe operation. Do more than move bulk material - use your D Series machine for grading and leveling as well as grabbing heavy items like tree trunks and concrete pillars.With a 4-in-1 bucket, a D Series loader backhoe delivers exceptional performance with just a single attachment. Choose a 6-in-1 bucket to flip down adjustable pallet forks for handling palletized loads without a dedicated vehicle. The backhoe can be equipped with a wide choice of buckets to match excavation, water-course clearance, trenching and other demands. You can also fit post-hole diggers, hydraulically extendable dippers and countless other tools. The long, nearly 23 ft (7 m) reach of both the standard and telescopic dipper allow for digging depth comparable to many conventional dedicated excavators. There are no performance compromises with a New Holland D Series loader backhoe.Similar models may be shown in addition to the featured model. Equipment may be shown with options.Businesses from agriculture to horticulture, landscaping to drainage and irrigation need multiskilled and cost-effective equipment. The digging and lifting capabilities of a New Holland D Series loader backhoe leave no room for compromising on performance. Built-in versatility, prioritized operator comfort and the advanced Tier 4 Final engine all work to prove how models B95D, B95D Tool Carrier (TC), B95D Long Reach (LR) will be one investment that never comes up short of work.FEATURESGET IT DONEThe B95D loader backhoe models are the economy-class solution to help you get the job done. High-performing loader lift capacities and an outstanding extended bucket digging force of 12, 933 lbs (5866 kg) help increase your productivity in a wide range of work.Loader lift capacity:•7,996 lbs (3627 kg) on model B95D and B95D LR•7,606 lbs (3450 kg) on model B96D TCPlus, you'll have 97 gross HP (72 kW) tackling those loading, grading, grabbing, lifting, excavating, digging, and planting tasks.REACH FOR IT ALLJobsite domination is at arm's length using the 20 ft 8 in feet (6286 mm) of overall reach on the B95D and TC models. Reaching for the stars? Check out model B95D LR with a standard overall reach of 19 ft 3 in (5853 mm) and 22 ft 4 in (6814 mm) when extended.Tower over the competitors with the standard maximum operating height of nearly 20 ft (6055-6285 mm) on the backhoe and 14 ft 5 in (4400 mm) of maximum loader operating height using the 1.1 cu yd Heavy-Duty General Purpose bucket.DEFINED BY VERSATILITYThe reliable hydraulic system on B95D models delivers fast cycle times in the wink of an eye, raising a 1.3 cy yd Heavy-Duty General Purpose bucket to full height in 3.7 sec, lowering in 2.70 sec and a 1.90 sec dump time.D Series loader backhoe models deliver exceptional performance with just a single attachment, while the front loader can be fitted to meet your needs with a 1.3 cu. yd. standard bucket, a 4x1 or 6x1 bucket. The backhoe can be equipped with a variety of attachments, such as a hydraulic breaker, auger, or thumb; and loader attachments such as a sweeper broom, fork, scrap grapple or claw, to match a wide range of worksite demands.DISCOVER GLIDE RIDEAn optional glide ride control system is available on the B95D models. This feature automatically activates above/below 3 preset speeds and the default speeds for activation/deactivation are 6/5 mph. Plus, glide ride improves material retention over uneven terrain, enables faster load cycle times and allows for higher travel speeds that reduce roading times.POWERSHIFT™ OR POWERSHUTTLE, IT'S YOUR CHOICED Series loader backhoes come with switchable two- or four-wheel-drive, a powershuttle forward and reverse mechanical transmission, or the automatic PowerShift™ transmission. All PowerShift™ models now feature a convenient F-N-R switch on the front loader multifunction lever.MECHANICAL FOUR-SPEED POWERSHUTTLE•Floor-mounted gear lever with steering column-mounted electro–hydraulic forward and reverse shuttle•Four gears with transmission de-clutch button incorporated into the gear lever•Affordable, dependable and easy to use•Ideal choice in applications where the backhoe will get more use than front loaderAUTOMATIC FOUR-SPEED POWERSHIFT™•Steering column-mounted lever for shuttle and speed selection•Fully modulated gear shifting with speed-matching F-N-R switch on the loader multifunction lever•Easy to use and maintain Ideal transmission choice for extensive front loader work•Loader joystick is fitted with a transmission de-clutch button to divert full power to hydraulics as required•Selectable two- or four-wheel-drivePOWERED BY FPT INDUSTRIALNew Holland is not going it alone when it comes to Tier 4 Final technology. In-house engine development specialists, FPT Industrial, have decades of development behind each engine that exists today.PIONEERING ALWAYS: Common Rail technology was developed by FPT Industrial in Switzerland during the 1980s and publicly introduced on the Alfa Romeo 156 in 1997. They were the very first to manufacture this technology on agricultural machines, starting with the TS-A tractor. Now, the FPT Industrial F5 3.4-liter, four-cylinder engine is the same unit proven on the D Series loader backhoes as it is on mighty New Holland T5 tractors.CLEANER EVERYWHERE: For the ninth consecutive year, CNH Industrial has topped the Dow Jones Sustainability World and Europe Indexes for the Industrial Engineering sector.RELIABILITY CONFIRMED: FPT Industrial has pioneered SCR technology since 1995 and has already produced over 1 million SCR engines during the last 8 years for the agricultural, construction and haulage industries.BIG ON CAB COMFORTThe all-new, class-leading D Series cab gives you more — more space, storage, visibility, and comfort — not to mention a wide range of new features. The cab is now wider, so you can turn the seat more easily when transitioning from front loader work to backhoe. New rear side windows allow better visibility and less obstruction. A redesign of the right-side console improves ergonomics and control layout, regardless of what direction you are working in.With the addition of two lockable compartments, two bottle holders, four open trays and a mobile phone holder, you'll take note of how storage capacity has been significantly increased and improves overall convenience. In-cab noise levels have been reduced by 3 dB(A). A high-grip floor covering comes standard to help prevent the operator from slipping when entering the cab with muddy footwear.A powerful lighting package featuring up to ten optional LED lights provide a true 360-degree light pattern thanks to the roof-mounted side lights. Large retractable sun visors, cup holders, glove box and a deluxe pneumatic heated seat are included. To top it off, the engine exhaust is located on the right side of the cab to provide a clear view of the loader arm.ALL-AROUND EASY SERVICINGRoutine care is the key to equipment performance and longevity. The D Series loader backhoe is designed for fast, easy routine service checks and features long 500-hour engine and 1,000-hour transmission service intervals to reduce downtime. Easy access is provided to all key fuel, engine, transmission and hydraulic filters, and all engine servicing can now be performed from one side for added convenience.SERVICE FEATURES AT A GLANCE:•One-piece flip-up hood offers full engine access•All key daily checks are grouped together on one side•Battery-disconnect and remote jump-start terminals are easily accessible•Quickly and safely access all key lubrication points on the loader and backhoe from the groundB95D B95D TC B95D LR BASE EQUIPMENTENGINE•Dry dual-element air cleaner•Fuel filter w/ water separator 10 micron paper filter•Glow Plugs•FPT F5BFL413B Diesel•Diesel Oxidation Catalyst with SCR•Full flow engine oil filter•Electronic throttles – foot and rotary hand•Self-adjusting belt•High Pressure Common RailTRANSMISSION•Power shuttle fully synchronized gearbox, 4 forward/4 reverse speeds, and power-reversing torque converter•Two position electric disconnect on loader control and gearshiftOUTBOARD REAR AXLE/BRAKES•Planetary final drives•Button activated differential lock•Multi-plate, hydraulic, self-adjusting, self-equalizing outboard wet disc brakes•Independent SAHR parking/emergency brakeFRONT AXLE•74" tread width•8-bolt wheel hubs•Hydrostatic power steering with priority valve•Integrated steering cylinder•2WD axle: cast iron•FWD axle: cast iron•FWD electrical engagement with indicator lightELECTRICAL•12-volt system•160-amp high-capacity alternator•Single battery•Sealed fuseblock compartment•Water resistant main fuseblockLIGHTING•4 Halogen worklights on canopy•8 Halogen worklights on cab•Stop and turn signals•Four-way safety flashersBACKHOE•Includes: Standard 14-ft curved boom, Center pivot swing post, Boom cylinder, and Dipper cylinder•Dipper cylinder and dipstick•2-lever backhoe controls (SAE Pattern)•Dirt pads•Front counterweight - 282 lbs.•Backhoe bucket not includedOPERATOR’S STATION (ROPS)•Dual side entry flat deck•Interior rearview mirror•Built-in beverage holder•Key start switch with electric shut-off•2-position horn control•Electric analog instrumentation•Tachometer/hourmeter•Fuel gauge•DEF gauge•Fixed steering wheel•Auxiliary 12-volt output/cigarette lighter•Pre-wired for emergency beacon•Pre-wired for road headlights•Vinyl suspension seat•2-inch retractable seatbeltOPERATOR’S STATION (CAB)•Dual side entry flat deck•Interior rearview mirror•Built-in beverage holder•Coat hook•Pre-wired for radio•Key start switch with electric shut-off•Headliner•2-position horn control•Molded floor mat•Electric instrumentation•Tachometer/hourmeter•Fuel gauge•DEF gauge•Interior dome light•Fixed steering wheel•USB charge port•Pre-wired for emergency beacon•Pre-wired for road headlights•Adjustable side window openings•One-piece rear window•Adjustable heater/blower fan•Adjustable front sun-screen shade•Cloth suspension seat•2-inch retractable seatbelt•HeaterLOADER•Straight loader arm design (B95D, B95D LR)•Curved loader arm design (B95D TC)•4-Bar bucket linkage•Bucket level indicator•Return-to-dig feature•Dual lift and bucket cylinders•Hydromechanical self-leveling (B95D, B95D LR)•Single lever control•Loader arm support•1.1 yd3 heavy duty bucket (B95D, B95D LR)•1.3 yd3 heavy duty bucket (B95D TC)•Bolt-on cutting edge•Mechanical self leveling (B95D TC)HYDRAULICS•O-ring Face seal connectors•”PD” type diagnostic port connectors•Open center coaxial drive hydraulic pump•7 micron spin-on filter element•Mechanical, Gear Pump - 151 L/min (40 gpm)•Pilot, Axial Piston Pump - 6 to 156 L/ min (1.6 to 41.2 gpm)SAFETY AND SECURITY•4-Post ROPS/FOPS•Lockable Compartments for: Engine, Hydraulic System, Battery•Lockable fuel & DEF cap•Horn•Backup alarmB95D B95D TC B95D LR OPTIONAL EQUIPMENTENGINE•*110-volt engine block heaterELECTRICAL•Dual batteriesBACKHOE•2-lever pilot controls with pattern changer •*Mechanical backhoe bucket quick coupler•4-lever backhoe controls•2-lever ISO excavator pattern backhoe controls•HED extendible dipperstick•Multiple bucket options from factory•Heavy-duty and extra heavy-duty backhoe buckets•Flip over stabilizer padsOPERATOR’S STATION (ROPS)•Electric ON/OFF control of hydraulic hand tool function•Foot-activated switch control of backhoe hammerOPERATOR’S STATION (CAB)•Air conditioning system•Electric ON/OFF control of hydraulic hand tool function•Foot-activated switch control of backhoe hammer•3-inch retractable seatbelt•Tilt steering wheel•Super deluxe Air Ride seat•Vinyl suspension seat•LED work lightsLOADER•Multiple buckets available•Mechanical Quick Coupler (B95C, B95C LR)•Hydraulic quick coupler (B95D TC only)HYDRAULICS•Backhoe hammer circuit•Mid-mount hand tool circuit•Extra function backhoe valve with control pedal (less HED)•*Glide Ride control systemTOTAL VEHICLE•Fire extinguisher•Special order paint colors•*External rearview mirrors•Front fenders•*Operator cooling fan•*4wd driveshaft guard kit•Tool box (lockable)LOADER ATTACHMENTS•Sweeper brooms•4x1 bucket•Auger•Claw•Forks•Scrap grapple•FFC Style CouplerBACKHOE ATTACHMENTS•Hydraulic breaker•Hydraulic auger•Hydraulic thumb•Additional buckets*Factory or Dealer installed optionSimilar models may be shown in addition to the featured model. Equipment may be shown with options.Specifications are subject to change without prior notice.

DIMENSIONS

Transport length, ft/in (mm)

23’ 6” (7159)

Transport height, ft/in (mm)

12’ 9” (3879)

Wheelbase, in (mm) 2WD

7’ 2” (2178)

Wheelbase, in (mm) 4WD

7’ 2” (2178)

Height to top of cab, ft/in (mm)

9’ 5” (2862)

Blade width, ft/in (mm)

7’ 5” (2248)

Bucket Rollback At ground level

43˚

Bucket Rollback Raised

Adjustable

Digging depth below grade, in (mm)

9 (219)

Transport width, ft/in (mm)

7’ 7” (2318)

Stabilizer spread, operating, ft/in (mm)

10’ 7” (3226)

Stabilizer spread, leveling angle

14˚

LOADER DIMENSIONS 1.3 cu yd Heavy-Duty General Purpose

Max operating height, ft/in (mm)

14’ 5” (4384)

Height to hinge pin, ft/in (mm)

11’ 1” (3384)

Dump height, ft/in (mm)

8’ 4” (2551)

Max dump angle

45˚

Reach @ 45 degree dump angle, ft/in (mm)

2’ 8” (824)

Max grading angle

116˚

LOADER PERFORMANCE 1.3 cu yd Heavy-Duty General Purpose

Linkage geometry

curved

Bucket breakout force, lbf (daN)

14,711 (6544)

Lift capacity to full height, lbs (kg)

7606 (3450)

SAE heaped capacity, cu yd (m3)

1.3 (1.0)

SAE struck capacity, cu yd (m3)

0.8 (1.05)

Bucket weight, lbs (kg)

1043 (473)

Cutting width, in (mm)

89 (2248)

Cycle Raise to full height

3.70 sec

Cycle Dump time

1.90 sec

Cycle Lower

2.70 sec

WEIGHT

Base Unit (4WD, Cab) lbs (kg)

17,703 (8030)

With options added

2WD

-386 lbs

Canopy

-397 lbs

4x1

+770 lbs

6x1

+1810 lbs

Std. (counterweight)

-700 lbs

Med. (counterweight)

-170 lbs

Engine

Make and model

F5BFL413B*B003

Type

Tier 4 Final certified, Diesel Oxidation Catalyst with Urea Dosing Module and Selective Catalytic Reduction, HPCR, 4-cycle diesel

Aspiration

Turbocharged Aftercooled

Rated rpm

2200 RPM

Number of cylinders

4

Displacement, cu in (l)

207 (3.4)

Horsepower, gross, hp (kW)

97 (72)

Horsepower, net hp (kW)

95 (71)

Peak torque, lb-ft (Nm) @ RPM

338 (452) @ 1400

TRANSMISSION

TypePower ShuttlePowershift
ManufacturerCarraroCarraro
Transmission typeSynchromeshHydraulic clutch packs
Gear4F/4R4F/4R
Max Fwd travel speed, mph (kph)22.5 (36.2)22.1 (35.5)
NoteTravel Speeds with 19.5L-24 Rear Tires

MANEUVERABILITY

Less BrakesWith Split Brakes
2WD curb clearance13’ 6”12’ 7”
4WD curb clearance15’ 9”11’ 5”
2WD bucket clearance17’ 9”16’ 8”
4WD bucket clearance19’ 5”16’ 6”

HYDRAULIC SYSTEM

Pilot Control Pump

Variable displacement

System type

Open center

Main pump type

Dual gear

Pump capacity gpm (lpm)

40 (151)

System relief pressure

3045 psi

Electrical

Alternator output

160 amps

Battery capacity (std/opt)

1200/900 CCA

REFILL CAPACITIES

Fuel tank gal (L)

34.6 (131)

DEF system, gal (l)

3.5 (13.2)

Cooling system, gal (l)

6.4 (24)

Engine oil, includes filter, gal (l)

2.1 (8.0)

Hydraulic tank, gal (l)

13.4 (50.7)

Hydraulic system, gal (l)

29 (111)

CYLINDER SPECS

Loader cylinder

3.54” bore x 28.6” stroke

Backhoe

Boom cylinder

5” bore x 35.71” stroke

Arm cylinder

4.75” bore x 27.64” stroke

Bucket cylinder

3.5” bore x 30.16” stroke

Swing cylinder

4.33” bore x 9.38” stroke

SERVICE INTERVALS

Engine oil

500 hours

Hydraulic oil filter

1000 hours

Engine coolant

2000 hours

Rear axle oil

1000 hours

BACKHOE DIMENSIONS

StandardRetractedExtended
Max dig depth, ft/in (mm)14’ 5” (4385)15’ 1” (4595)18’ 6” (5627)
Dig depth, 2’ level bottom, ft/in (mm)14’ 3” (4344)14’ 11” (4547)18’ 4” (5578)
Dig depth, 8’ level bottom, ft/in (mm)13’ 1” (3988)13’ 9” (4191)17’ 5” (5298)
Loading Height, ft/in (mm)11’ 9” (3570)12’ 1” (3681)14’ 2” (4324)
Max pin height, ft/in (mm)14’ 9” (4503)15’ 2” (4611)17’ 3” (5254)
Max operating height, ft/in (mm)17’ 10” (5425)18’ 2” (5529)20’ 3” (6173)
Loading Reach @ max height, ft/in (mm)5’ 7” (1707)5’ 11” (1794)8’ 8” (2638)
Dig reach @ max height, ft/in (mm) 8’ 5” (2562)8’ 11” (2706)11’ 8” (3550)
Bucket rotation (max)204°204°204°
Reach from swing post, ft/in (mm)18’ 4” (5579)17’ 6” (5323)20’ 9” (6313)
Reach (overall), ft/in (mm)18’ 5” (5612)17’ 7” (5355) 20’ 8” (6286)

BACKHOE PERFORMANCE

StandardRetractedExtended
Bucket capacity, cu ft (m3)7.5 (.21)7.5 (.21)7.5 (.21)
Bucket digging force, lbs (kg)12,933 (5866)12,933 (5866)12,933 (5866)
Crowd digging force, lbs (kg)8588 (3895)8100 (3674)5782 (2623)
Boom lift @ -8 ft, lbs (kg)3228 (1467)2732 (1242)2329 (1058)
Dipper lift @ +10 ft, lbs (kg5342 (2423)5831 (2645)3885 (1762)
2025 NEW HOLLAND B95D TC For Sale in (2024)

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Sen. Ignacio Ratke

Last Updated:

Views: 5999

Rating: 4.6 / 5 (56 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Sen. Ignacio Ratke

Birthday: 1999-05-27

Address: Apt. 171 8116 Bailey Via, Roberthaven, GA 58289

Phone: +2585395768220

Job: Lead Liaison

Hobby: Lockpicking, LARPing, Lego building, Lapidary, Macrame, Book restoration, Bodybuilding

Introduction: My name is Sen. Ignacio Ratke, I am a adventurous, zealous, outstanding, agreeable, precious, excited, gifted person who loves writing and wants to share my knowledge and understanding with you.